Here you can search our online database of IDDRG papers using various search profiles (e.g. author(s)’name, Papers’ title, etc.). Papers are available online only since 2005. If you need old paper please go to IDDRG Library Archives where you will find information how to get these papers in paper format.
| Title | |||
|---|---|---|---|
|
Texture-based formability prediction for Mg wrought alloys ZE10 and AZ31 |
Y. Jeongü, D. Steglich | 2017 | Download |
|
Plasticity and fracture modeling of three-layer steel composite Tribond(R) 1200 for crash simulation |
T K Eller, K A Ramaker, L Greve, M T Andres, J Hazrati and A H van den Boogaard | 2017 | Download |
|
Prediction of fracture initiation in square cup drawing of DP980 using an anisotropic ductile fracture criterion |
N Park, H Huh and J W Yoon | 2017 | Download |
|
The new conceptual stress-based model for prediction of fracture limit for aluminum bulk material being used in automotive wheel |
MoonKi Bae, SeungHyun Hong, JuYup Lee and JeongWhan Yoon | 2017 | Download |
|
Orthotropic ductile fracture criterion based on linear transformation |
J W Yoon, S Zhang and T B Stoughton | 2017 | Download |
|
Experimental and numerical investigation of the formability of an ultra-thin copper sheet |
C H Pham, S Thuillier, P Y Manach | 2017 | Download |
|
Application of DIC techniques to detect onset of necking and fracture in uniaxial and bulge tests |
TB Stoughton, JY Min, and JE Carsley | 2017 | Download |
|
Influence of shear cutting parameters on the fatigue behavior of a dual-phase steel |
I. Paetzold, F. Dittmann, R. Golle, P. Haefele, H. Hoffmann | 2017 | Download |
|
Optimized cutting and forming parameters for a robust collar drawing process for hot-rolled complex-phase steels |
S. Kovacs, T. Beier and S. Woestmann | 2017 | Download |
|
Development of a 2-stage shear-cutting-process to reduce cut-edge-sensitivity of steels |
T Gläsner, C Sunderkötter, H Hoffmann, W Volk and R Golle | 2017 | Download |
|
The effect of microstructure on the sheared edge quality and hole expansion ratio of hot-rolled 700 MPa steel |
A Kaijalainen, V Kesti, R Vierelä, M Ylitolva, D Porter and J Kömi | 2017 | Download |
|
Assessing edge cracking resistance in AHSS automotive parts by the Essential Work of Fracture methodology |
D Frómeta, M Tedesco, J Calvo, A Lara, S Molas and D Casella | 2017 | Download |
|
Experiments and FE-simulations of stretch flanging of DP-steels with different shear cut edge quality |
M. Sigvant, J. Falk and J. Pilthammar | 2017 | Download |
|
Numerical model for a quantitative estimation of sliver formation in shearing process |
Ramya Selvaraj, Luca Quagliato, Sewon Jang and Naksoo Kim | 2017 | Download |
|
Experimental investigation of piercing of high-strength steels within a critical range of slant angle |
S Senn and M Liewald | 2017 | Download |
|
Material fracture analysis and burr formation in sheet metal blanking |
V. Sonkamble, P. Dhondapure, K Narasimhan and A. Tewari | 2017 | Download |
|
Experimental investigation of piercing of high-strength steels within a critical range of slant angle |
S Senn and M Liewald | 2017 | Download |
|
Material fracture analysis and burr formation in sheet metal blanking |
V. Sonkamble, P. Dhondapure, K Narasimhan and A. Tewari | 2017 | Download |
|
Blanking Method with Aid of Scrap to Reduce Tensile Residual Stress on Sheared Edge |
T Yasutomi, S Yonemura , T Yoshida, M Mizumura and S Hiwatas | 2017 | Download |
|
An inverse approach for the geometry prediction of sheetmetal parts with embossings made of high- and ultra-high strength steels |
J Stahl, P Tröber, M Feistle, R Golle and W Volk | 2017 | Download |