Here you can search our online database of IDDRG papers using various search profiles (e.g. author(s)’name, Papers’ title, etc.). Papers are available online only since 2005. If you need old paper please go to IDDRG Library Archives where you will find information how to get these papers in paper format.
| Title | |||
|---|---|---|---|
|
Mechanism-based modelling of localisation and damage processes in sheet metal forming |
D. Helm, A. Butz | 2017 | Download |
|
Hydroformability study of seamless tube using Gurson- Tvergaard-Needleman (GTN) fracture model |
K R Harisankar , A Omar and K Narasimhan | 2017 | Download |
|
Failure criteria for the magnesium alloys AZ31 and ZE10 and their application to forming simulations |
D Steglich, JY Lee | 2017 | Download |
|
Plasticity and damage with gradient enhancement: A review of application to high speed forming |
L Poggenpohl, Y Kiliclar, T Brepols, S Wulfinghoff and S Reese | 2017 | Download |
|
Experiments and numerical simulation of stress-state-dependent damage in sheet metal forming |
M Brunig, S Gerke and M Schmidt | 2017 | Download |
|
Quasi-in-situ investigations of microstructural damage mechanisms under complex strain paths |
C. C. Tasan, E. Plancher and N. Vonk | 2017 | Download |
|
Microstructural characterization and simulation of damage for geared sheet components |
G Gerstein, K Isik, F Gutknecht, P Sieczkarek, J Ewert, A E Tekkaya, T Clausmeyer and F Nürnberger | 2017 | Download |
|
Evaluation of the VDA 238-100 Tight Radius Bending Test using Digital Image Correlation Strain Measurement |
K Cheong, K Omer, C Butcher, R George and J Dykeman | 2017 | Download |
|
Comparative Study on Damage Evolution during Sheet Metal Forming of Steels DP600 and DP1000 |
S Münstermann, J Lian, F Pütz, M Könemann, V Brinnel | 2017 | Download |
|
Reduction of cross section area at fracture in tensile test: measurement and applications for flat sheet steels |
P Larour, J Freudenthaler and T Weissböck | 2017 | Download |
|
Crack formation on metal foils during high dynamic and quasi-static bulge test |
S Veenaas and F Vollertsen | 2017 | Download |
|
Material testing in support of the development of plasticity and failure models for sheet metal |
A. Gilat, and J.D. Seidt | 2017 | Download |
|
Mesh refinement study and experimental validation for stretch bending of sheet metals. |
M Raupach, S Kreissl, L Vuaille, T Möller, H Friebe, W Volk | 2017 | Download |
|
3D numerical model of tube-tubesheet joint roller expansion process |
D Alexouli, D Bjesen, L R Bystrup, C R Klose, G N Nikolov and K B Nielsen | 2017 | Download |
|
Numerical simulations of twin-roll casting for Mg-AZ31 and AA3003 sheets |
J. J. Park | 2017 | Download |
|
Characterizing the Elastic Behaviour of a Press Table through Topology Optimization |
J Pilthammar, M Sigvant, M Hansson, E Pálsson and W Rutgerss | 2017 | Download |
|
New method for springback compensation for the stamping of sheet metal components |
A Birkert, B Hartmann and M Straub | 2017 | Download |
|
Yield strength mapping in the cross section of ERW pipes considering kinematic hardening and residual stress |
Dongwook Kim, Luca Quagliato, Wontaek Lee and Naksoo Kim | 2017 | Download |
|
Modeling of nonlinear elastoplastic behavior after stress reversal for high strength steel |
S Sumikawa, A Ishiwatari and J Hiramoto | 2017 | Download |
|
Development of oil canning index model for sheet metal forming products with large curvature |
Honglae Kim, Seonggi Lee, Mohanraj Murugesan, Seokmoo Hong, | 2017 | Download |